Wsm 05-E2B SERIES Spezifikationen PDF herunterladen (Seite 114)

ENGINE

SM-E4B SERIES, WSM

1-S50

(9) Alternator

1. Remove the pulley (1).

2. Remove the rear end cover (12).

3. Remove the brush holder (11).

4. Remove the IC regulator (10).

5. Remove the four screws holding the stator lead wires.

6. Remove the rectifier (9).

7. Remove the rear end frame (8).

8. Press out the rotor (6) from drive end frame (2).

9. Remove the retainer plate (5).

10. Press out the bearing (4) from drive end frame (2) with a press and jig.

11. Lightly secure the rotor with a vise to prevent damage, and remove the bearing (7) with a puller.

(When reassembling)

9Y1210785ENS0060US0

(1) Pulley

(2) Drive End Frame

(3) Stator

(4) Bearing

(5) Retainer Plate

(6) Rotor

(7) Bearing

(8) Rear End Frame

(9) Rectifier

(10) IC Regulator

(11) Brush Holder

(12) Rear End Cover

Tightening torque Pulley nut

58.4 to 78.9 N·m

5.95 to 8.05 kgf·m

43.1 to 58.2 lbf·ft

KiSC issued 01, 2013 A

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 137 138

Keine Kommentare

Wsm 05-E2B SERIES Spezifikationen Seite 114