Wsm 05-E2B SERIES Spezifikationen PDF herunterladen (Seite 119)

S-66

03-E2B SERIES, WSM

DIESEL ENGINE

(5) Cylinder

Cylinder Wear

1. Measure the I.D. of the cylinder at the six positions (see figure)

with a cylinder gauge to find the maximum and minimum I.D.’s.

2. Get the difference (Maximum wear) between the maximum and

the minimum I.D.’s.

3. If the wear exceeds the allowable limit, bore and hone to the

oversize dimension. (Refer to “Correcting Cylinder”.)

4. Visually check the cylinder wall for scratches. If deep scratches

are found, the cylinder should be bored. (Refer to “Correcting

Cylinder”.)

[D1403/V1903-E2B]

[D1503/V2003-TE2B]

[D1703/V2203/F2803-E2B]

W1034389

Cylinder I.D.

Factory spec.

80.000 to 80.022 mm

3.14961 to 3.15047 in.

Allowable limit

80.150 mm

3.15551 in.

Cylinder I.D.

Factory spec.

83.000 to 83.022 mm

3.26772 to 3.26858 in.

Allowable limit

83.150 mm

3.2736 in.

Cylinder I.D.

Factory spec.

87.000 to 87.022 mm

3.42520 to 3.42606 in.

Allowable limit

87.150 mm

3.4311 in.

A: Top

B: Middle

C: Bottom (Skirt)

(a) Right-angled to Piston Pin

(b) Piston Pin Direction

KiSC issued 05, 2008 A

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 125

Kommentare zu diesen Handbüchern

Keine Kommentare

Wsm 05-E2B SERIES Spezifikationen Seite 119

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motor Wsm 05-E2B SERIES