Wsm 05-E2B SERIES Spezifikationen PDF herunterladen (Seite 87)

S-34

03-E2B SERIES, WSM

DIESEL ENGINE

Thermostat Assembly

1. Remove the thermostat cover mounting screws, and remove the

thermostat cover (1).

2. Remove the thermostat assembly (3).

(When reassembling)

• Apply a liquid gasket (Three Bond 1215 or equivalent) only at the

thermostat cover side of the thermostat cover gasket (2).

W10363950

Tappets

1. Remove the tappets (1) from the crankcase.

(When reassembling)

• Visually check the contact between tappets and cams for proper

rotation. If defect is found, replace tappets.

• Before installing the tappets, apply engine oil thinly around them.

IMPORTANTQ

• Do not change the combination of tappet and tappet guide.

W1022001

Valves

1. Remove the valve caps (3).

2. Remove the valve spring collet (4), pushing the valve spring

retainer (5) by valve spring replacer (1).

3. Remove the valve spring retainer (5), valve spring (6) and valve

stem seal (2).

4. Remove the valve (7).

(When reassembling)

• Wash the valve stem and valve guide hole, and apply engine oil

sufficiently.

• After installing the valve spring collets (4), lightly tap the stem to

assure proper fit with a plastic hammer.

IMPORTANTQ

• Do not change the combination of valve and valve guide.

W1022102

(1) Thermostat Cover

(2) Thermostat Cover Gasket

(3) Thermostat Assembly

(1) Tappet

(1) Valve Spring Replacer

(2) Valve Stem Seal

(3) Valve Cap

(4) Valve Spring Collet

(5) Valve Spring Retainer

(6) Valve Spring

(7) Valve

KiSC issued 05, 2008 A

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 124 125

Kommentare zu diesen Handbüchern

Keine Kommentare

Wsm 05-E2B SERIES Spezifikationen Seite 87

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motor Wsm 05-E2B SERIES