Wsm 05-E2B SERIES Spezifikationen PDF herunterladen (Seite 92)

S-39

03-E2B SERIES, WSM

DIESEL ENGINE

Fuel Camshaft and Fork Lever Assembly

1. Remove the fuel feed pump.

2. Detach the fuel camshaft stopper (1).

3. Remove the three fork lever holder mounting screws (2).

4. Draw out the fuel camshaft assembly (5), (6) and fork lever

assembly (3), (4), (7) at the same time.

(When reassembling)

• After installation, check to see that the fork lever 1 (3) and lever

2 (4) are fixed to the fork lever shaft, and that they can turn

smoothly in the holder (7).

W1025309

Oil Pump

1. Remove the nut.

2. Draw out the oil pump drive gear (2) with gear puller (1).

3. Remove the four oil pump mounting screws. Detach the oil pump

(3).

W1025581

Crank Gear

1. Draw out the crank gear (1) with a puller (2).

2. Remove the feather key.

W1025476

(1) Fuel Camshaft Stopper

(2) Fork Lever Holder Mounting Screw

(3) Fork Lever 1

(4) Fork Lever 2

(5) Injection Pump Gear

(6) Fuel Camshaft

(7) Fork Lever Holder

(1) Gear Puller

(2) Oil Pump Drive Gear

(3) Oil Pump

(1) Crank Gear (2) Gear Puller

KiSC issued 05, 2008 A

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 124 125

Keine Kommentare

Wsm 05-E2B SERIES Spezifikationen Seite 92